How to clean a blender, a clean blender on a bright kitchen counter with a lemon beside it

How to Clean a Blender: An Easy Guide for a Fresh Blender

Quick answer: how to clean a blender

Yes, you can clean a blender in less than two minutes, and it is easy. To learn how to clean a blender the fast way, fill the jar halfway with warm water, add a drop of dish soap, blend for 30 seconds, then rinse. The full guide below shows you how to clean a blender step by step, so your blender stays fresh and ready to use.

Why You Should Clean Your Blender After Every Use

A blender can hold old smoothie, soup, or sauce in the jar and under the blades. If you leave it, the food dries on, smells bad, and gets hard to wash off. Learning how to clean a blender right after you use it saves time and keeps your blender clean and safe. A quick wash after every use also stops germs from growing in the jar. Once you know how to clean a blender the fast way, you will never dread the job. For more easy home guides, browse our Home and Cleaning tips.

What Do You Need?

You do not need special tools to learn how to clean a blender. Here is the full list.

  • Warm water
  • A drop of dish soap
  • A soft sponge or cloth
  • A dry towel

How to Clean a Blender in 7 Easy Steps

How to clean a blender, blender filled with soapy water blending on a kitchen counter
Blender filled with soapy water blending on a kitchen counter

This is the full method for how to clean a blender the right way. Read the steps once, then start.

Step 1: Rinse the Jar Right Away

Pour out what is left in the jar, then rinse the jar with warm water. Do this right after you blend, before the food dries on. Rinsing first is the first step in how to clean a blender well.

Step 2: Fill the Jar with Warm Water and Soap

Fill the jar halfway with warm water. Add one drop of dish soap. Do not add too much soap, or you will have too many suds to rinse out. This is the easy part of the job.

Step 3: Blend for 30 Seconds

Put the lid on tight, then blend on high for 30 seconds. The soapy water will wash the jar, the blades, and the lid. This self-clean step is the heart of how to clean a blender fast.

Step 4: Rinse the Jar and Lid

Pour out the soapy water. Rinse the jar and the lid under warm running water until the soap is gone. If you still see suds, rinse one more time. Rinsing well is a key part of how to clean a blender the right way.

Step 5: Wash the Blades with Care

Take the jar off the base. If your jar comes apart, take out the blade part and wash it by hand with warm soapy water. Blades are sharp, so hold the blade part by the plastic base, never by the sharp edges. Rinse it well. A careful wash is part of how to clean a blender without cuts.

Step 6: Wipe the Base with a Damp Cloth

Never put the motor base in water. Wipe it with a damp cloth to clean off any drips or food. Dry it with a clean towel. Keeping the base dry is a key part of how to clean a blender safely.

Step 7: Dry Everything and Put It Away

Dry the jar, the lid, and the blades with a clean towel, or let them air dry upside down. Make sure everything is fully dry before you put the blender away. These small steps are the last step in how to clean a blender from start to finish.

Ways to Clean a Blender: Compare the Methods

There are three easy ways to clean a blender. Here is how to clean a blender each way, so you can pick the one that fits your day.

  • Quick self-clean: warm water plus a drop of soap, blend for 30 seconds, then rinse. Best for daily use. Takes 2 minutes. Costs nothing.
  • Deep clean by hand: take the jar apart, wash the jar and blades with warm soapy water, and dry everything fully. Best for dried food and sticky messes. Takes 10 minutes. Costs nothing.
  • Dishwasher: put the jar and lid on the top rack. Best when you want a hands-free clean. Takes one wash cycle. Check your manual first, because not every jar is dishwasher safe.

The quick self-clean is the best way for most days. Use the deep clean once a week or when food dries on. The dishwasher is a good backup when you are short on time. If you want the easy way, start with the quick self-clean.

How to Clean Blender Blades

How to clean a blender, blender jar taken apart showing the blades on a clean white towel
Blender jar taken apart showing the blades on a clean white towel

The blades are the hardest part to clean, because food sticks under them. To clean a blender blade, fill the jar with warm water and a drop of soap, then blend for 30 seconds. That washes most of the food off the blades. If food is still stuck, take the blade part out and wash it by hand with a soft sponge. Never use your fingers near the sharp edges. Dry the blades well so they do not rust. A clean blade cuts better and lasts longer.

Can You Put a Blender in the Dishwasher?

How to clean a blender, hand wiping the blender motor base with a damp cloth
Hand wiping the blender motor base with a damp cloth

Yes, you can put most blender jars and lids in the dishwasher, but check your manual first. Put the jar and lid on the top rack, where the water is cooler. Never put the motor base in the dishwasher or in water. The base has wires and a motor inside, and water will break it. If your jar is not dishwasher safe, use the quick self-clean or wash it by hand. When you learn how to clean a blender in the dishwasher, the top rack rule is the one to remember. For dishwasher safety details, see Vitamix’s guide to cleaning a blender.

What About a Beauty Blender?

A beauty blender is not a kitchen blender. It is a small makeup sponge that you use to put on foundation. To clean a beauty blender, wet it with warm water, add a drop of mild soap, and squeeze it again and again until the water runs clear. Rinse it well and let it air dry. Do not put a beauty blender in the microwave to clean it, because the heat can change the shape of the sponge. This short note covers the beauty blender questions, so the rest of this guide stays about your kitchen blender.

Best Blender Cleaning Tools: What to Use and What to Avoid

The right tools make cleaning a blender easy. Here is what to use and what to avoid.

Use: – Warm water and a drop of dish soap, for the quick self-clean – A soft sponge or cloth, for the jar and blades – A dry towel, to dry everything fully – A bottle brush, for hard to reach spots under the blades

Avoid: – Putting the motor base in water, which can break the motor – Using a rough scrub pad, which can scratch the jar – Using bleach or strong cleaners, which can leave a taste – Touching the blades with your fingers, which can cut you – Leaving food to dry in the jar, which makes cleaning much harder

If you wonder how to clean a blender with the right tools, start with warm water, soap, and a soft sponge. That is all you need most days.

Mistakes to Avoid When You Clean a Blender

Many people make these mistakes when they learn how to clean a blender. Avoid them and your blender will stay clean and safe.

  • Leaving food in the jar to dry, which makes it hard to wash off
  • Putting the motor base in water or in the dishwasher
  • Using too much soap, which leaves suds that are hard to rinse
  • Touching the sharp blades with bare fingers
  • Putting the jar away while it is still wet, which can cause smells
  • Forgetting to wipe the base, which can get sticky over time

How to Clean a Blender: Quick Checklist

Use this checklist every time you clean your blender.

  1. Rinse the jar right after you use it.
  2. Fill the jar halfway with warm water and a drop of soap.
  3. Blend for 30 seconds, then rinse the jar and lid.
  4. Wash the blades by hand with care.
  5. Wipe the motor base with a damp cloth, never in water.
  6. Dry everything fully before you put it away.
  7. Deep clean once a week, or when food dries on.

Frequently Asked Questions

What is the fastest way to clean a blender?

The fastest way to learn how to clean a blender is the self-clean method. Fill the jar halfway with warm water, add a drop of dish soap, blend for 30 seconds, and rinse. The whole job takes about two minutes.

How do I clean a blender with dried food stuck inside?

Soak the jar in warm soapy water for 15 minutes first. The soak will soften the dried food. Then blend the soapy water for 30 seconds, rinse, and wash the jar by hand if you still see food stuck on.

Can I put my blender jar in the dishwasher?

Most blender jars and lids can go in the dishwasher on the top rack, but check your manual first. Never put the motor base in the dishwasher or in water, because the motor and wires will break.

How do I clean blender blades safely?

Blend warm soapy water for 30 seconds first, which washes most food off the blades. If you take the blade part out, hold it by the plastic base and wash it with a soft sponge. Never touch the sharp edges with your fingers.

How often should I clean my blender?

Clean your blender after every use with the quick self-clean. Deep clean it by hand once a week, or any time food dries on. Wipe the base every time you use it.

How do I clean a beauty blender?

Wet the beauty blender with warm water, add a drop of mild soap, and squeeze it again and again until the water runs clear. Rinse it well and let it air dry. Do not clean it in the microwave.

Why does my blender still smell after I clean it?

A smell usually means food is stuck under the blades or in the lid seal. Deep clean the jar by hand, take out the blade part, and wash the lid seal well. Let everything dry fully before you put it away, because a wet jar can smell.

What should I not put in my blender to clean it?

Do not use bleach, strong cleaners, or a rough scrub pad. Do not put the motor base in water. Use warm water and a drop of dish soap, which is safe and works well.

Related Guides You May Like

If you liked this guide on how to clean a blender, try these easy guides from Daily Life Hacks. Learn how to clean a dishwasher filter to keep your dishwasher fresh, see how to clean a whiteboard to make it look new, read how to wash pillows for fresh, fluffy pillows, try how to make cold foam for iced coffee at home, and learn what is a duvet cover for your bed. Also read how to fix printer streaks, how to iron a shirt, and how to reduce ping. Also read how to make tea, how to remove a splinter, how to clean a hairbrush, and my wife is yelling at me. Also read how many miles is a 5k. Also read how to stop spam emails, how to stop procrastinating, and how to prepare for a phone interview. Also read how to draw anime eyes. You can also browse all our Home and Cleaning tips for more simple guides.

Final Thoughts

Learning how to clean a blender is easy once you know the golden rule: clean it right after you use it. Fill the jar with warm water and a drop of soap, blend for 30 seconds, and rinse. That is all it takes most days. Now that you know how to clean a blender the easy way, your blender will stay fresh, clean, and ready to use. Just remember how to clean a blender: wipe the base, dry everything fully, and deep clean once a week. Those three rules are the heart of how to clean a blender.

About the author

Sophia Lee writes about cooking, home and cleaning, and the garden for Daily Life Hacks. She makes home life simple and tasty, with tips she uses in her own kitchen every day. More from Sophia Lee

Similar Posts